Let's see how to replace the blades on the front wiper of a Fiat Panda. Take the front brush with your hands, pull the movable brush (gently without breaking it) and slide it off the left arm. We mount the new brush on the mobile arm, we will hear a hooking tack.
We offer spares and parts for all the popular Fiat models. Among these are the Fiat Panda – popular as a city car; the newer Panda 4×4 and Cross models; and the stylish but affordable Fiat 500 range. Contact us for assistance in choosing the best parts and spares for Fiat. Whatever part your Fiat needs, you’ll find it at Masterparts.Has anyone solved this issue rather than replace? I have had mine apart and find that the slightest tap on the casing will restart the wiper intermittent for a little while then will stop with a click again. I've cleaned, checked and re-tensioned the contacts. Yet I cannot sort it. I am
The connectors to the block (assuming a pre '93 Panda) are a "spade" type push fit, but to remove them there is a little springy bit to press as you pull the connector off. Your best course of action is to switch the heater on (with the ignition on) and have a gentle poke about the wires going to the block, and see if you get the heater to go. It turned out that I just needed to touch the wiper stick anyway and it stopped until I let go. In giving the stick a slight tap it sounded like a spring on the inside made the noise. I slowly put some WD40 in the gap around the trip button on the end of the stick, then I slightly pulled the end of the stick away making a slight gap between the